交聯絕緣護套電力電纜 YJLV23 YJV23 YJLV230.6/1KV 交聯聚乙烯絕緣聚氯乙烯護套電力電纜(0.6/1KV XLPE insulated PVC sheathed power cable) 一、產品特點交聯聚乙烯絕緣電力電纜具有高機械強度、耐環境應力好、優良的電氣性能和耐化學腐蝕等特點，重量輕，結構簡單，使用方便。本產品適用于交流額定電壓U0/U為0.6/1KV及以下的輸配電線路上。阻燃型電纜的主要特點是電纜不易著火或著火時延燃僅局限在一定范圍內，適用于電纜敷設密集程度較高的發電站、地鐵、隧道、高層建筑、大型工礦企業、油田、煤礦等場所。低煙無鹵阻燃型電纜的特點是電纜不僅具備阻燃性能，而且具有低發煙性和無害性（害性和腐蝕性較少），適用于對電纜阻燃、煙密度、毒性指數等有特別要求的場所，如地鐵、隧道、核電站等。耐火型電纜的主要特點是電纜除了能在正常的工作條件下傳輸電力外，電纜在著火燃燒時仍然能保持一定時間的正常運行，適用于核電站、地鐵、隧道、高層建筑等與防火和消防救生有關的地方。 二、產品標準本產品按GB/T12706.1-2002標準生產，還可以按用戶要求的其他標準生產。阻燃型電纜除了按上述標準外，其阻燃性能按GB/T19666-2005標準規定分成A、B、C三種不同的阻燃類別，A能類別的阻燃性能最優，用戶可根據需要選用。無鹵低煙阻燃型電纜分另A、B、C三種不同的阻燃類別，煙密度通過GB/T17651-1998規定的試驗，PH值及導電率應符合GB/T19216.21-2003。 三、型號與名稱規格 名稱 YJV YJLV 交聯聚乙烯絕緣聚氯乙烯護套電力電纜 YJY YJLY 交聯聚乙烯絕緣聚乙烯護套電力電纜 YJV22 YJLV22 交聯聚乙烯絕緣鋼帶鎧裝聚氯乙烯護套電力電纜 YJV23 YJLV23 交聯聚乙烯絕緣鋼帶鎧裝聚乙烯護套電力電纜備注 1． 阻燃型電纜在普通型電纜型號前加ZA、ZB或都ZC； 2． 無鹵型低煙阻燃型電纜在普通型電纜型號前加WDZA、WDZB、WDZC； 3． 耐火型電纜型號在普通型電纜型號前加ZAN、ZBN或ZCN。 四、產品使用特性 1、額定電壓U0/U為0.6/1KV。 2、電纜導體的最高額定溫度為90攝氏度。 3、短路時（最長持續時間不超過5秒），電纜導體的最高溫度不超過250攝氏度。 4、電纜敷設時的環境溫度應不低于0攝氏度，其最小彎曲半徑如下：單芯無鎧裝電纜：20D 單芯有鎧裝電纜：15D 三芯無鎧裝電纜：15D 三芯有鎧裝電纜：12D 注：D為電纜外徑。 Characteristicsapplication XLPE insulated power cable has the advantages of not only high mechanical strength good ambient stress resistance, good electrical propertiesanti-chemical corrosion, but also simple construction, light weightconvenient to use. It applies to electrical power transmissiondistribution lines with A.C.rated voltage U0/U up toincluding 0.6/1KV. The flame retardant XLPE power cable is hard to get firethat the continuous burning of cables is very limited when it is on fire. It applies to the places with many cables laid tightly together such as power-generated station, subway, tunnel, high-storey building, large-size factorymines, oil fieldcoal mine. Main characteristics of low smoke, halogen-free, flame retardant power cable is very low smoke emission harmless (low toxic, low corrosive) besides the property of flame retardant. It can be used in such kinds of places as subway, tunnel, nub power station with special demands of property of flame retardant, the density of smoke emissiontoxic index when cable gets burning. Fire-resistance cable can operate normally for some time when it is burning except that it can transmit electrical power under normal condition. It is used in the places such as nub power station, subway, tunnel, high-storey buildingother places concerning to fire securityits lifesaving. Standards of products The cable is manufactured in accordance with the standards of GB/T12706.1-2002. It can also be produced accordance to special requirements put forward by clients. Besides, the standards mentioned above, the flame retardant property of the flame retardant cable must meet the corresponding demands of class A, B,C which is stipulated in GB/T19666-2005. Among the 3 classes, class A is best. Clients can any type of cable as practical needs. Low smoke, halogen-free, flame retardant power cable must meet the corresponding requirements of class A, BC. It must pass the test of smoke density GB/T17651-1998the test measuring the PH valueconductivity which is stipulated in GB/T17650.2-1998. Fire-resistance property of the fire-resistance cable can meet GB/T19216.21-2003. ModelName Model Name YJV YJLV XLPE insulated PVC sheathed power cable YJY YJLY XLPE insulated PE sheathed power cable YJV22 YJLV22 XLPE insulated , steel tape armored, PVC sheathed power cable YJV23 YJLV23 XLPE insulated, steel tape armored, PE sheathed power cable Remark The flame retardant cable is plus ZA, ZB,ZC before the model of common power cable. The low smoke, halogen-free, flame-retardant cable is plus WDZA, WDZB,WDZC before the model of common power cable. While the model of fire-retardant cable plus ZAN, ZBNZCN before the model of common power cable. Technical beters 1.The rated voltage U0/U is 0.6/1KV. 2.Maximum conductor temperature under normal operation is 90 centigrade degree. 3.Maximum conductor temperature under short circuit (Max duration is not more than 5s) is not more than 250 centigrade degree. 4.Minimum installation ambient temperature is not less than zero centigrade degree.. Installation bending radius are not less than the following specified values: Single core non-armored cable: 15D Single core armored cable: 15D 3 cores non-armored cable: 15D 3 cores armored cable: 12D Note: D means outer diameter of cable.
