夜色网,色欲aⅴ精品一区二区三区四区,国产精品jizz视频国产y网,欧美精品综合视频一区二区

產品簡介
YJV22 6/10KV鎧裝高壓電力電纜
YJV22 6/10KV鎧裝高壓電力電纜
產品價格:
上架日期:2019-09-02 15:33:37
產地:河北
發貨地:天津
供應數量:不限
最少起訂:1米
瀏覽量:374
資料下載:暫無資料下載
其他下載:暫無相關下載
詳細說明
    YJV22 6/10KV鎧裝高壓電力電纜
    6kV~35kV 中低壓銅芯及鋁芯交聯聚乙烯絕緣電力電纜(YJV電纜,YJV22電纜,YJLV電纜,YJLV22電纜)
    XLPE Insulated Power Cable
      交聯聚乙烯絕緣電力電纜是采用化學方法或物理方法,使聚乙烯分子由線型分子結構轉變?yōu)槿S網狀結構,由熱塑性的聚乙烯變成熱固性的交聯聚乙烯,從而提高了聚乙烯的耐老化性能、機械性能和耐環境能力,并保持了優良的電氣性能。
    交聯聚乙烯絕緣電力電纜導體的允許長期zui高溫為90攝氏度,較低絕緣電纜、聚氯乙烯絕緣電纜和聚乙烯絕緣電纜高,且具有重量輕、結構簡單、使用方便、耐化學腐蝕和敷設不受落差限制等優點。
    26/35KV電力電纜,18/30KV交聯電纜,12/20KVYJV電纜,8.7/15KVYJV22電纜線,6/10KV鋁芯交聯電纜線,3.6/6KVYJLV單芯電纜   
    中低壓交聯電纜產品標準  Standard
    本產品按GB12706《額定電壓35V及以下銅芯、鋁芯塑料絕緣電力電纜》標準生產,同時還可根據用戶需要按國際電工委員會推薦標準IEC、英國標準、德國標準及美國標準生產。
    The product is manufactured according to the standard of《GB12706 or IEC、BS、DIN and ICEA upon request.
    適用范圍  Applications
    本產品適用于工頻額定電壓3.6/6kv~26/35kv輸配電線路作配送電能子用。
    The product is suitable for use in power transmission and distribution lines with rated power frequency voltage 3.6/6kv~26/35kv.
    使用特性  Operating characteristics
    · 工頻額定電壓U0/U為3.6/6kv~26/35kv。
    Rated power-frepuency voltage U0/U: 3.6/6kv~26/35kv.
    · 電纜導體的zui高允許工作溫度:90℃。
    Max.admissible operating temperature of the conductor:90℃.
    · 短路時(zui長時間不超過5s)電纜導體的zui高溫度不超過2500C。
    Max. short-circurt temperature of conductor shall not exceed 2500C.
    (5s maximum duration)
    · 電纜敷設時環境溫度應不低于00C。
    The ambient temperature under installation should not below 00C.
    · 電纜彎曲半徑:三芯電纜不小于電纜外徑15倍;單芯電纜不小于電纜外徑20倍。
    The bending radius of a single-core cable should not less than 20 times of the cable diameter. 
    The bending radius of a single-core cable should not less than 15 times of the cable diameter. 
    電纜額定電壓的選擇   Voltage designation
    · 電纜的額定電壓應適合于電纜系統的運行狀況,用U0/U(Um)kv表示。
    U0-電纜設計用的導體對地或金屬屏蔽之間的額定工頻電壓;
    U-電纜設計用的導體間的額定工頻電壓;
    Um-設備可承受的“zui高系統電壓”的zui大值。
    The rated voltage of the cable for a given applixation shall be suitable for the operating conditions
    in the system in which the cable is used,and is expressed in the b of U0/U(Um)kv
    Where:
    U0-The rated power-frequency voltage between conductors and earth bllic screen ,for which the cable designed;
    U - The rated power-frequency voltage between conductos, for which the cable designed;
    Um- The maximum value of the“highest system voltage”for which the equipment may beused.
在線詢盤/留言
  • 免責聲明:以上所展示的信息由企業自行提供,內容的真實性、準確性和合法性由發布企業負責,本網對此不承擔任何保證責任。我們原則 上建議您選擇本網高級會員或VIP會員。
    0571-87774297