下載PDF版完整參數(shù)表:
| 產品闡述 | ||
|---|---|---|
|
G12 flat module 2 x 4 bs (PNP) |
||
| General specifications | ||
|---|---|---|
| Slave type | Double A/B slave | |
| AS-Interface specification | V3.0 | |
| Required master specification | ≥ V2.1 | |
| UL File Number | E223772 | |
| Functional safety related beters | ||
| MTTFd | 60 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| LED PWR/FAULT |
2 Dual LEDs green/red green: AS-Interface voltage red: Communication error yellow/red flashing: Address 0 green/red flashing: Sensor supply overload |
|
| LED IN | switching state (b); 8 LED yellow | |
| Electrical specifications | ||
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface | |
| Rated operating current | ≤ 80 mA (without sensors) / max. 280 mA | |
| Protection class | III | |
| Surge protection | Ue: Over voltage category III, safe isolated power supplies (PELV) derived from mains up to 300 V AC line-to-neutral | |
| Input | ||
| Number/Type |
2x 4 bs for 2- or 3-wire sensors (PNP), DC alternative 2x 2 bs for 4-wire sensors (PNP), DC |
|
| Supply | from AS-Interface | |
| Voltage | 21 ... 31 V | |
| Current loading capacity | ≤ 200 mA, overload and short-circuit protected | |
| Input current | ≤ 8 mA (limited internally) | |
| Switching point | according to DIN EN 61131-2 (Type 2) | |
| 0 (unattenuated) | ≤ 2 mA | |
| 1 (attenuated) | ≥ 6 mA | |
| Signal delay | < 1 ms (b/AS-Interface) | |
| Compliance with standards and directives | ||
| Directive conbity | ||
| EMC Directive 2004/108/EC | EN 61000-6-2:2005, EN 61000-6-4:2007, EN 50295:1999 | |
| Standard conbity | ||
| Noise immunity | EN 61000-6-2:2005, EN 50295:1999 | |
| Emitted interference | EN 61000-6-4:2007 | |
| Input | EN 61131-2 | |
| Degree of protection | EN 60529 | |
| Fieldbus standard | EN 50295, IEC 62026-2 | |
| Programming instructions | ||
| Profile | S-0.A.2 | |
| IO code | 0 | |
| ID code | A | |
| ID1 code |
Slave 1 Slave 2 1 2 |
|
| ID2 code | 2 | |
| Data bits (function via AS-Interface) | Input slave 1 b slave 2 | |
| D0 | IN1.1 IN2.1 | |
| D1 | IN1.2 IN2.2 | |
| D2 | IN1.3 IN2.3 | |
| D3 | IN1.4 IN2.4 | |
| Parameter bits (programmable via AS-i) | function | |
| P0 | not used | |
| P1 |
Input filter P1 = 0 b filter on, pulse suppression ≤ 2 ms P1 = 1 b filter off (default settings) |
|
| P2 |
Synchronous mode P2 = 0 synchronous mode on P2 = 1 synchronous mode off (default settings) |
|
| P3 | not used | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Relative humidity | 85 % , noncondensing | |
| Climatic conditions | For indoor use only | |
| Altitude | ≤ 2000 m above MSL | |
| Pollution degree | 3 | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection |
cable piercing b flat cable yellow bs: M12 round connector |
|
| Material | ||
| Housing | PBT | |
| Mass | 230 g | |
| Tightening torque, cable gland | 0.4 Nm | |
| Mounting | Mounting plate | |
倍加福P+F、西克SICK、皮爾磁PILZ、易福門IFM、倍福BECKHOFF。價格好，貨期快，以下型號都是特價現(xiàn)貨，歡迎詢價...
188557 GLV18-55/59/102/159
188559 GLV18-55/73/120
