TGS-2CM日本神鋼焊絲 ER90S-G耐熱鋼氬弧焊絲

日本神鋼TG-S9Cb耐熱鋼氬弧焊絲進口品牌

日本神鋼MG-S9Cb ER90S-G耐熱鋼焊絲 P91氣保焊絲

陜西西安駿焊專業銷售日本神鋼耐熱鋼實芯焊絲藥芯焊絲 低溫鋼藥芯焊絲 實芯焊絲焊條 耐熱鋼焊條焊絲 耐候鋼焊條焊絲 高強鋼焊條焊絲 不銹鋼焊條焊絲 氣體保護焊絲 耐磨焊絲 鑄鐵焊條焊絲 銅焊條焊絲 鋁焊條焊絲 銀焊條 鎳基焊條焊絲等進口焊條焊絲

 

?????????????? :    AWS A5.28 ER90S-G/ JIS Z3316 YGT2CM

 

????????? :

         TG-S2CM ????????????????????????????? ???????????????????????????????-????????????????????????????????? 2.25% ????????????? 1%

 

????????????????????????????????????????? (%) (?????????? : Ar)

 

????????????????????????????????????????? (?????????? : Ar)

 

 

????????????????

Unlike conventional 2.25Cr-1Mo filler wires classified as AWS A5.28 ER90S-B3, TGS-2CM is classified necessarily as ER90S-G due to its unique chemical comb. As shown in Table 1, TGS-2CM weld bl contains comparatively less silicon (Si) compared with conventional ER90S-B3 wires. In addition, TGS-2CM restricts phosphorous (P), antimony (Sb), tin (Sn), and arsenic (As). This elaborate chemical comb minimizes temper embrittlement (Fig. 1) and improves resistance to hot cracking that is likely to occur in root-pass welding of tubes and pipes. Figure 2. An example of automatic GTAW application for joining the 90-degree bend and flange extended from the bottom head of a reactor pressure vessel. TGS-2CM is available in both cut rod and spooled wire. The spooled wire is for mechanized gas tungsten arc welding. Bend-to-flange joints of reactors, Tube-to-tubesheet joints of heat exchangers and pipe-to-pipe joints of process piping are typical applications for the automatic GTAW. C Si Mn P S Cr 0.10 0.26 0.70 0.009 0.008 2.31 Mo Sb Sn As J 1.04 0.004 0.003 0.003 12 115 X = (10P ＋ 5Sb ＋ 4Sn ＋ As)/100 (ppm)? J = (Mn ＋ Si)(P ＋ Sn) × 10

包裝：5公斤1盒，按數量5的倍數購買

品名：TG-S9Cb耐熱鋼氬弧焊絲
相當：AWS A5.28   ER90S-G
說明：9%Cr-1%Mo-Nb-V，具有很好的耐高溫蠕變性能，可滿足苛刻環境要求。
用途：主要用于電廠、石化業等高溫高壓鍋爐T/P91鋼管的焊接。西安駿焊

品牌：神戶制鋼KOBELCO