【標題】
The pipe length between the suction surface of the vortex sewage self-priming pump and the pump inlet should be less than the pump mounting height plus 2. The difference is that the backwater does not flow to the outer edge of the impeller, but to the impeller inlet. When the self-priming pump is activated, the reflux valve under the front of the impeller must be opened so that the liquid flow in the pump returns to the impeller inlet. The water is mixed with the air from the tube under the b of high speed rotation of the impeller, bing a mixture of gas and water to the separation chamber. Here the air is discharged and the water is returned from the reflux valve to the impeller inlet. So repeated until the air drained and sucked in the water. Flow along the worm shell. As the liquid in the worm shell constantly impact the cascade, constantly crushed by the impeller, with the air strongly mixed mixing, the bation of gas-water mixture, and continuous flow caused by the gas water can not be separated. The mixture is stripped by the tongue at the outlet of the worm shell and enters the separation chamber along the short tube. In the separation chamber the air is separated and drained by the outlet tube, while the water still flows through the left and right backwater holes to the outer edge of the impeller and is mixed with the tube air.
一、管道泵產品概述:
ISG 系列單級單吸立式管道離心泵，博源泵業科技人員聯合國內水泵專家選用水力模型，采用IS型離心泵之性能參數，在一般立式泵的基礎上進行巧妙組合設計而成。同時根據使用溫度、介質等不同在ISG型基礎上派出適用熱水、高溫、腐蝕性化工泵、油泵。該系列產品具有節能、噪音低、性能可靠等優點。jdhuiquan4.10
二、管道泵主要用途:
1、ISG型立式管道離心泵，供輸送清水及物理化學性質類似于清水的其他液體之用，適用于工業和城市給排水、高層建筑增壓送水、園林噴灌、消防增壓、遠距離輸送、暖通制冷循環、浴室等冷暖水循環增壓及設備配套，使用溫度T<80℃。
2、IRG(GRG)型立式熱水(高溫)循環泵廣泛適用于：能源、冶金、化工、紡織、造紙，以及賓館飯店等鍋爐高溫?zé)崴鰤貉h(huán)輸送及城市采用暖系統循環用泵，IRG型使用溫度T<120℃，珀GRG型使用溫度T<240℃。
3、IHG型立式管道化工泵，供輸送不含固體顆粒，具有腐蝕性，粘度類似于水的液體，適用于石油、化工、冶金、電力、造紙、食品制藥和合成纖維等部門，使用溫度為20℃~+120℃。
4、YG型立式管道油泵，供輸送汽油、煤油、柴油等石油產品，被輸送介質溫度為-20℃~+120℃。
管道泵@阜新ISG100-200管道泵@電廠管道泵
泵軸支撐，解決了原來立式泵靠電機軸承支撐的不足之處；采用水力模型的葉輪，消除了原立式泵軸向力大的不足之處；電機采用Y系列標準通用電機，解決原立式泵加長軸電機配套更換難的問題；同時100％的便拆結構，解決了更換大功率水泵的軸承，機械密封，葉輪，便拆立式管道泵與國內同類產品相比，具有運轉更平穩，使用壽命長，配套更方便，維護保養更輕松等等，無可代替的優點。在立式泵系列產品中屬國內前列，各項技術居國內，是替代ISG型立式泵，IS型離心泵，S型雙吸泵等常規各種離心泵的產品?？戳⑹焦艿辣秒姍C頂部風扇的轉向是否符合泵體紅色箭頭指向的方向,轉速太快看不出來的話,在剛停泵時看風扇慣性的轉向。1,試泵時站在泵的端面。
三、管道泵工作條件:
1、吸入壓力≤1． 0MPa，或泵系統工作壓力≤1．6MPa，即泵吸入口壓力+泵揚程≤1．6MPa，泵靜壓試驗壓力為2．5MPa，訂貨時請注明系統工作壓力。泵系統工作壓力大于1．6MPa時應在訂貨時另行提出，以便在制造時泵的過流部分和聯接部分采用鑄鋼材料。
2、環境溫度<40℃，相對濕度<95％。
3、所輸送介質中固體顆粒體積含量不超過單位體積的0．1％，粒度<0．2mm。
注：如使用介質為帶有細小顆粒，請在訂貨時說明，以便廠家采用耐磨式機械密封。
四、管道泵產品特點:
1、管道泵為立式結構，進出口口徑相同，且位于同一中心線上，可象閥門一樣安裝于管路之中，外形緊湊美觀，占地面積小，建筑投入低，如加上防護罩則可置于戶外使用。
2、葉輪直接安裝在電機的加長軸上，軸向尺寸短，結構緊湊，泵與電機軸承配置合理，能有效地平衡泵運轉產生的徑向和軸向負荷，從而保證了泵的運行平穩，振動小、噪音低。
管道泵@阜新ISG100-200管道泵@電廠管道泵
Pipeline centrifugal pump installation must tighten the foot bolts, so as to avoid the impact of vibration on the pump perbance. In order to facilitate the maintenance of pipeline centrifugal pump and safe use, in the pump import and export pipe on each installation of a control valve and in the pump outlet near the installation of a pressure gauge to ensure that the operation within the rated lift and flow range, to ensure the normal operation of the pump, increase the service life of the pump. Pipeline centrifugal pump after installation to toggle the pump shaft, impeller should be no friction or card death phenomenon, otherwise the pump should be disassembled to check the cause. ISG Vertical Pipeline centrifugal pump is a rigid connection installation and flexible connection installation of two kinds (see connection mode). ISG Vertical pipeline centrifugal pump for the transport of water and other liquids with physical properties like water, the use of medium temperature of not more than 80 ℃, suitable for industrial and urban
品牌出于對本體的理解，更清楚怎樣去做整合來充分發揮功能達到客戶的需求。估摸很多中小企業想通過自己的產品價格來應對這次原材料上漲，但對于習慣了低價格國貨的消費者們與經銷商估計就會不樂意了，與澳大利亞昆士蘭大學共建綠色智造聯合研發中心，與澳大利亞臥龍崗大學、烏克蘭巴頓研究所、普銳特、浦項鋼鐵等具有影響力的院校及企業加強合作交流……抓創新就是抓發展，6、建立清晰的獎勵制度科學技術是生產力。
