ZJW泵@南京單級入料加壓泵@單級入料加壓泵垂詢電話
Lotion slowly open the intake valve or the air intake, the cake is washed or dried. After the operation is completed, wash off the pump or compressor and the valve, cake discharge operation can be carried out. The fourth step cake discharge: first turn off the feed pump and the feed valve, lotion, or into the air intake means and the valve, then press and hold the "release" button on the operation panel, the pressing plate to drive the piston rod retracted, suitable retreat rear b, the release hold the "release" button to remove the filter plate is pulled by block artificial cake, while cleaning the sealing surface of the adhesive residue to prevent the sealing surface of the filter cake sandwiched affect the sealing perbance. Generating leakage after full press cake: a third washing step or dried. Shutting down the feed pump and the feed valve. Wash pump or compressor opened to this one operation cycle is completed.
ZJW-11型壓濾機專用入料泵的簡述： ZJW-11型壓濾機入料專用泵是一種性能特殊的雜質泵。近年來，被業內人士稱之為"壓濾機專用入料加壓泵"。該泵由后側面吸入漿液，簡單的填料密封無泄漏，更重要的是其流量、揚程曲線很陡，非常適合一些特殊的工況。jdhuiquan4.12
ZJW泵@南京單級入料加壓泵@單級入料加壓泵垂詢電話
Step feed: When filter pressed to feed operations perbed: Open feed pump, slowly open the feed valve feed pressure is gradually increased to normal pressure. In this case the leakage was observed between the filter case and the filter plates were, after a period of time the filter press out liquid outlet hole gradually decreased, then state cake is gradually filled with the filter chamber, a liquid outlet when not when only a small amount of fluid or liquid, to prove the filter chamber has been compleby filled cake b cake. The need for washing or dry cake into operation, can be followed by such operations do not need to be washed or dried cake discharge operation.
ZJW-11型壓濾機專用入料泵的特點：
1、水力設計、結構設計先進新穎、效率高、搞磨蝕、運行平穩可靠；
2、前期入料流量大、壓力低；
3、后期壓榨流量小、壓力高；
4、軸密封簡單可靠，不注水、不用機械密封、無泄漏；
5、壓濾入料不用變頻調速，輸送濃度高。
ZJW泵@南京單級入料加壓泵@單級入料加壓泵垂詢電話
4, often check the sealing surface of the filter plate, to ensure its smooth, clean, before pressing, to filter cloth carefully examined to ensure that no folding frame filter, no damage, no slag to make it smooth intact, to ensure that the role of the filter press, plate and frame filter press to always wash cloth, ensure good penetration of the filtrate. However, if the image is the same filter Changzhou Yaron EHV series, with high pressure, the processed sludge cake tack-free, low moisture content, there is no need to check frequently cloth
ZJW-II型壓濾機專用入料泵性能參數表：
| 型號 項目 | 轉速r/min | 流量m3/h | 揚程m | 極大軸功率K/H | 參考電機 | |
| 型號 | 功率（KW） | |||||
| 65ZJW-11 | 1480 | 27.5 41.4 55.2 69.0 80.0 | 76.0 72.2 66.1 56.0 43.5 | 22.3 | Y225S-4 | 30 |
| 37 | ||||||
| 80ZJW-11 | 1480 | 40.0 60.0 80.0 100 115 | 76.0 72.2 66.1 56.0 43.5 | 32 | Y225S-4 | 37 |
| Y225M-4 | 45 | |||||
| 100ZJW-11 | 1480 | 56.0 85.0 113 150 169 | 73.3 69.0 62.5 51.2 44.0 | 49 | Y225M-4 | 45 |
| Y250M-4 | 55 | |||||
| 125ZJW-11 | 1480 | 70.0 105 140 186 245 | 73.5 71.6 68.6 61.9 48.5 | 62.5 | Y250M-4 | 55 |
| Y280S-4 | 75 | |||||
| 125ZJW-11 | 1480 | 79.7 119 159 211 279 | 80.0 78.0 74.8 67.5 52.9 | 78.2 | Y280S-4 | 75 |
| Y280M-4 | 90 | |||||
| 125ZJW-11 | 1480 | 58.0 87.0 116 154 203 | 91.8 89.1 85.7 77.3 60.6 | 64.7 | Y280S-4 | 75 |
| Y280M-4 |
90 |
|||||
鍛焊，熱處理，裝置，試泵等車間，悉數高鉻合金及鑄鐵，渣漿泵鑄件選用樹脂砂造型，爐前剖析選用直讀光譜儀，快速，的把握資料成份的度，結合先進的鑄造工藝，澆注工藝。機加工公司現有鑄造熱處理工藝。在確保鑄件資料原料配比正確的一起流量5-13400m3/h雙相不銹鋼專業的技能團隊為客戶供給售前渣漿泵規劃選型。
