ZJW泵@馬鞍山泥漿壓榨機喂料泵@泥漿壓榨機喂料泵歡迎垂詢
Lotion slowly open the intake valve or the air intake, the cake is washed or dried. After the operation is completed, wash off the pump or compressor and the valve, cake discharge operation can be carried out. The fourth step cake discharge: first turn off the feed pump and the feed valve, lotion, or into the air intake means and the valve, then press and hold the "release" button on the operation panel, the pressing plate to drive the piston rod retracted, suitable retreat rear b, the release hold the "release" button to remove the filter plate is pulled by block artificial cake, while cleaning the sealing surface of the adhesive residue to prevent the sealing surface of the filter cake sandwiched affect the sealing perbance. Generating leakage after full press cake: a third washing step or dried. Shutting down the feed pump and the feed valve. Wash pump or compressor opened to this one operation cycle is completed.
一、產品概述
ZJW型壓濾機專用泵本由公司結合各壓濾機生產廠家及使用現場的實際工況，精心設計開發的新一代無泄漏壓濾機專用泵，該產品廣泛應用于壓濾機入料泵應用尤為廣泛，通過在冶金、礦山、電廠、化工等行業中的使用，發現該系列產品具有結構
合理，運行可靠，壽命長等特點。該系列產品采用獨特的水力設計及雙級葉輪的結構，確保了其性能曲線比一般YLB、UHB、HFTK等普通離心泵改造而成的壓濾機入料泵更陡，更適合壓濾機入料的特殊使用工況。jdhuiquan4.12
ZJW泵@馬鞍山泥漿壓榨機喂料泵@泥漿壓榨機喂料泵歡迎垂詢
Can according to different needs, as the press can automatically become a plate and frame filter chamber design, van, the separator, the same need to achieve separation barrier medium. However, in order to better automate the process of automatic press, automatic press in some detail with sophisticated processing such as the filter plate recess inclination, and size distribution of small particles on the filter plate, into the design size and orientation of the inlet and outlet holes, with the handle mounting roller and the like. Filter works automatically start between the filter and the weight of the mechanical filter to compare. Automatic filtering principle of separation filter and mechanical filter is not really much of a difference.
二、創新技術特點
1.獨特的密封裝置采用負壓技術加組合密封裝置，在壓力不斷增加而流量逐漸減少的情況下，密封組件不承受壓力，尤其是在后期壓榨期時因泵在大壓力下，其創新密封結構設計，保證軸封處基本達到無泄漏。
2.雙級葉輪的結構設計
該泵采用雙主泵體，雙主葉輪的結構設計，解決了單泵單葉輪泵在入料初期時振動和噪音過大、性能曲線平坦、葉輪流道窄、通過性能差等缺點非常適合壓濾機入料時應阻力的變化來實現大流量低壓力喂料與小流量、高壓力過濾的要求。
3.雙葉輪泵比單葉輪泵抗耐磨性更好
因雙葉輪泵以較低的葉輪出口線速度獲得更高的泵出口壓力從而克服了單葉輪泵為增加壓力而增加葉輪線速度，而導致葉輪、泵殼磨損加劇的缺點，有效的提高水泵等過流部件的壽命。
4.應用范圍廣
該產品可采用鑄鋼、高鉻鑄鐵（耐腐耐磨材料）、不銹鋼等多種材質制造，可適合不同的介質需求，用戶選用的范圍更廣。
5.葉輪與泵壁的間隙可調
獨特的軸承箱設計，用戶在常時間使用后，因磨損造成壓力下降時，可通過調整葉輪與泵壁的間隙來繼續保障水泵的高壓力，提高了水泵的使用壽命、延長了大修周期，克服了傳統單葉輪壓濾泵因磨損壓力下降快，經常更換葉輪使用壽命短等缺點。
ZJW泵@馬鞍山泥漿壓榨機喂料泵@泥漿壓榨機喂料泵歡迎垂詢
Third, do not b a cake or cake cake do not b or constitute causes of uneven uneven There are many, lack of feed or too thin, there may be obstruction can cause this phenomenon. Investigation and the reasons for these problems to be thin, after all, to find the problem when cut, then symptomatic and treatment to solve the problem. The primary solutions are: add a feed, adjusting the process, improve feeding, finishing fabric or replace the filter cloth, finishing the obstruction, finishing feed holes, finishing drainage holes, finishing or replace the filter cloth, or add pressure pump power, low-voltage start, constantly boost and other bs.
三、性能參數表
|
型號 |
轉 速 (r/min) |
流 量 (m3/h) |
揚 程 (m) |
軸功率 (k/h） |
選配電機 功率(kw) |
|
65ZJW-III |
1480 |
27.5 41.4 55.2 69.0 80.0 |
76.0 72.2 66.1 56.0 43.5 |
22.3 |
Y225S-4 30KW |
|
Y225S-4 37KW |
|||||
|
80ZJW-III |
1480 |
40.0 60.0 80.0 100 115 |
76.0 72.2 66.1 56.0 43.5 |
32 |
Y225S-4 37KW |
|
Y225M-4 45KW |
|||||
|
100ZJW-III |
1480 |
56.0 85.0 113 150 169 |
73.3 69.0 62.5 51.2 44.0 |
49 |
Y225M-4 45KW |
|
Y250M-4 55KW |
|||||
|
125ZJW-III |
1480 |
70.0 105 140 186 245 |
73.5 71.6 68.6 61.9 48.5 |
62.5 |
Y250M-4 55KW |
|
Y280S-4 75KW |
|||||
|
125ZJW-III |
1480 |
79.7 119 159 211 279 |
80.0 78.0 74.8 67.5 52.9 |
78.2 |
Y280S-4 75KW |
|
Y280M-4 90KW |
|||||
|
125ZJW-III |
1480 |
58.0 87.0 116 154 203 |
91.8 89.1 85.7 77.3 60.6 |
64.7 |
Y280S-4 75KW |
|
Y280M-4 90KW |
ZJW泵@馬鞍山泥漿壓榨機喂料泵@泥漿壓榨機喂料泵歡迎垂詢
Filter plate and frame filter cloth near the contact nip portion should ensure a flat, wrinkle does not occur, the filter cloth is bed is pressed to prevent damage to or mud leak filter plate. Long tail extending into the snap ring to prevent or nip where the filter plate and filter cloth is damaged, or a leak to b a slurry, should be cut short tail. When frame filter means, or should be noted that no foreign matter larger sludge particles between the filter plate and filter cloth, foreign matter or larger sludge particles when the laminate may b a filter plate or damaged filter cloth.
出產設備先進，檢測方法完善，具有一批高本質的科技人員，一起引進了的出產技能和處理履歷。出產的產品品種繁復，規范完全，科技含量高。河北會泉泵業是專業出產水泵的大型骨干企業質量超卓。位于“我國泵閥之鄉”———河北保定。企業資金雄厚。
