夜色网,色欲aⅴ精品一区二区三区四区,国产精品jizz视频国产y网,欧美精品综合视频一区二区

Honeywell CC-PCNT02是一種輸出通信模塊，主要用于火災、故障等事件的通信。
該模塊具備200個事件（包括火災、故障、重置等）的通信能力，同時帶有至少486型PC和適當?shù)腜C軟件進行通信。在安裝方面，需要選擇探測器視野好、無視線堵塞的位置進行安裝，通常建議安裝在角落和天花板等位置。同時，需要保持探測器與墻壁的距離至少為1.2米，以避免熱源對探測器造成影響。
在固定探測器時，建議將探測器與外殼材料類型保持一致，例如可以在安裝支架上使用螺釘、鉚釘?shù)冗M行固定。如果安裝面為聚丙烯，可進行熱焊接用于固定支架。將外殼滑到安裝支架上，直到它鎖定到位。每個“引線”需要連接到適當?shù)倪B接上，可以參考第6節表1的細節進行接線。

請注意，在處理探測器的引線時需要小心謹慎，正確使用腕帶接地將有助于防止產品損壞。同時，該模塊可能包含一定數量的數字輸入通道，用于接收數字信號，如開關、傳感器或其他數字設備。

It is an output communication module mainly used for communication of events such as fires and faults.
This module has communication capabilities for 200 events (including fires, malfunctions, resets, etc.), and is equipped with at least 486 type PCs and appropriate PC software for communication. In terms of installation, it is necessary to choose a b with good visibility and no line of sight blockage for the detector, and it is usually recommended to install it in corners and ceilings. At the same time, it is necessary to maintain a distance of at least 1.2 meters between the detector and the wall to avoid the impact of heat sources on the detector.
When fixing the detector, it is recommended to keep the detector consistent with the type of housing material, such as using screws, rivets, etc. on the mounting bracket for fixation. If the installation surface is polypropylene, hot welding can be used to fix the bracket. Slide the housing onto the mounting bracket until it locks into place. Each 'lead' needs to be connected to an appropriate connection, which can be wired according to the details in Table 1 of Section 6.
Please note that caution is required when handling the leads of the detector. Proper use of wrist strap grounding will help prevent product damage. At the same time, the module may contain a certain number of digital b channels for receiving digital signals, such as switches, sensors, or other digital devices.