ZNC系統主要功能

ZNC system function

● 提供60組檔案儲存，三軸坐標可公英制切換。

Provide 60 sets of files for storages, three axises can change dimension between meter and Inch.

● 具有10段自動修細功能。 可以:(1) 自行編輯:依個人經驗去編輯加工條件;(2)AUTOZ自動編輯：給予最大深度初始電流及完成的粗細選擇,就會自動將加工條件編輯完成;（3）智能型條件編輯:只要選擇電極形狀，電極與工件材料,電極的截面積及加工完成粗細選擇與深度設定就會自動將加工條件編輯好，以上三種編輯方式，皆可由粗—中—細一次完成加工。

There are 10 functions to mended the processed bl automatically:(1) Program by oneself: You can program the processing conditions depends on your experience; (2) AUTOZ programs automatically: Giving the biggest depth at the first of electric current and finished choosing thickness or thinness, AUTOZ would program the processing conditions; (3) Inbligent programmed the conditions: only if choose the shape of electrode, the materials of both of electrode and work piece, the square of the electrode and choice size (thickness / thinness) of processed work piece when finished, the setting of depth, machine can program the processing conditions automatically.

All above three bs of program can b the way thick-medium- thin and finish the process.

● 放電條件自動調整，于放電不穩定時，計算機會自行修改放電效率及工作時間，待穩定后，放電條件會自動恢復，加工中可以隨時修改加工條件。

Adjust release electricity conditions automatically, when releasing electricity unsteadily, the computer would modify electricity efficiency and work time; releasing electricity will recover automatically when stead able.  During processing, the processing conditions are modified at any time.

● 自動防積碳偵測功能，遇積碳加上不穩定時，計算機自動調整各加工參數，并提高排渣高度，當穩定時就自動恢復。Defend to accumulate carbon to detect function automatically, meet to accumulate carbon to plus unsteady in fixed time, the calculator adjusts automatically each process beter, and raise row residue height, be a stability auto instauration

● 緩跳式快慢二段跳動（高跳），令大面積加工穩定，火花紋均勻，有效提升大面積電極加工之速度。Slowly jump type rate of speed 2 jump about(I am high to jump), it process a stability the big area, the spark line is even, promoting big area electrode to process effectively of speed

● 可程序高低二段跳動，令深孔或薄片加工之碳渣順利排出，防止積碳，有效提高深孔及薄片加工之效率。Can the procedure is two high and low flutters, it process deep bore or thin slice of the carbon residue ejects smoothly, prevent°froming accumulating carbon, raising deep bore and thin slice to process effectively of efficiency.

● 全新設計符合歐洲CE安全規格之電源箱及15" LCD(液晶顯示屏)，叮以防塵、防水．防干擾，提高電子板壽命。The all new design meets the power box of European CE safe specification and 15" CRT(the manifestation hold), 叮 in order to prevent dust, waterproof.defend interference, raise electronics plank life span.

● 采用工業級PC—BASE控制器反采用DOM新式內存取代傳統硬盤，讀文件速度更快穩定性極高，更適合于工業用途Adopting industrial controller anti- adoption DOM modern style memory of the PC-BASE replaces traditional hard drive, reading a document speed's faster stability very high, more suitable for industrial use

● 具有向上放電加工功能，使特殊工件加工更容易Have to heading up to turn on electricity to process function, make the special work piece process more easily

ZNC MACHINE UNIT  單軸數控電火花成型機床

﹡The content of this catalogue is subject to be changed by the factory.