什么是橡膠止水帶
What is a rubber hose
橡膠止水帶是以國產優質標一天然橡膠和各種合成橡膠為主要原料,摻加各種促進劑劑及填充劑,經塑煉、混煉、硫化、模壓而制成的一種止水帶產品,它就是利用橡膠的高彈性，在各種壓力荷載下產生彈性變形,從而起到堅固密封,可以有效地防止建筑構造的漏水,滲水并起到減震緩沖作用。在國家許多大型工程建筑設計中,土建、水土結構之間都有一定的伸縮要求，并存在防水防震等要求，因此采用和安裝橡膠止水帶是有效地解決以上工程中遇到種種問題。
The rubber sealing strip is made of high quality standard natural rubber and various synthetic rubber as the main raw material, adding accelerant agent and filler, a sealing strip products by plastication, mixing, curing and molding is made, it is the use of high elastic rubber, produce elastic debation under pressure load. In order to strengthen the seal, can effectively prevent the construction of the Water Leakage, seepage and play a cushioning. In many large national engineering and architectural design, there are some expansion requirements between civil engineering and water and soil structure, and there are requirements for water and shock proof. Therefore, the adoption and installation of rubber water stop are effective solutions to all problems encountered in the above projects.
沉降縫用橡膠止水帶是以國產優質標一天然橡膠和各種合成橡膠為主要原料,摻加各種促進劑及填充劑,經塑煉、混煉、硫化、模壓而制成的一種止水帶產品。
The rubber sealing belt for settlement joints is made of natural rubber and synthetic rubber as main raw materials, and all kinds of accelerators and fillers are mixed with various kinds of accelerators and fillers, which are made by mixing, mixing, vulcanizing and molding.
該材料具有良好的彈性,耐磨性、耐老化性和抗撕裂性能,適應變形能力強、防水性能好,溫度使用范圍為-45℃-+60℃.當溫度超過70℃,以及受強烈的氧化作用或受油類等有機溶劑侵蝕時,均不得使用橡膠止水帶.。應用于地下構筑物、水壩、貯水池、游泳池、屋面以及其他建筑物質和構筑物的變形縫防水.當使用橡膠止水帶是在混凝土澆注過程式中部分或全部澆埋在混凝土中，混凝土中有許多尖角的石子和銳利的鋼筋頭，由于塑料和橡膠的撕裂強度比拉伸強低3-5倍，止水帶一旦被刺破或撕裂時，不需很大外外力裂口就會擴大，所以在止水帶定位和混凝土澆搗過程中，應注意定位方法和澆搗壓力，以免止水帶被刺破，影響止水效果,具體注意事項
The material has good elasticity, abrasion resistance, aging resistance and tear resistance to debation ability, good waterproof perbance, temperature range of -45 DEG -+60 DEG. When the temperature exceeds 70 degrees, as well as by strong oxidation or by oil and other organic solvent erosion, not to use the rubber sealing belt. Used in underground structures, dams, water pool, swimming pool, roof and other building materials and building debation joint waterproof. When using the rubber sealing strip is in the concrete pouring process in all or part of pouring buried in concrete, there are many sharp stones and sharp head reinforced concrete, the tear strength when the plastic and the rubber tensile 3-5 times lower, waterstop once punctured or torn, without external force gap will expand, so the waterstop bing and concrete pouring process, should pay attention to bing b and pouring pressure, so as to avoid the water stop is punctured, influence the sealing effect, the specific matters needing attention
