道路施工高強度箱梁手持式鑿毛機雙頭隧道墻面風動鑿毛錘
手持式混凝土鑿毛機是一種把已經完成的主體結構面進行處理，使兩個施工階段的施工面粘結牢固的類似于"斬斧"的工具。
通常墻面風動鑿毛錘是應用在在線澆混凝土結構中，在現澆板澆注完畢后，要鑿毛，進行下一層的澆注，讓混凝土粘結牢固。
所以“橋面鑿毛錘”一般也被稱為“混凝土鑿毛機”。
雙頭隧道鑿毛機分為手持式、手推式兩種.根據不同的工程項目而選擇
如手持式氣動雙頭鑿毛機；動力源采用空氣壓縮機保證高頻率和相應的鑿擊力，便于高效作業。
地面處理鑿毛設備被應用于高速公路鐵路、橋梁、隧道、水利水電加固除險補強、建筑加固、裝飾裝修、市政道橋修補加固、機場、停車場等鑿毛加固工程領域。
機器型號 BC—1A BC—2A BC—3A
重量 2.1KG 3.2KG 5.2KG
長度 420mm 420mm 420mm
高度 1260mm 1260mm 1260mm
寬度 320mm 380mm 560mm
震動水平平均當量 0.96平方米/秒 0.96平方米/秒 0.96平方米/秒
空壓機匹配要求 壓力為5公斤/平方厘米，
聯系人金經理電話13934240041

Road construction high strength box beam hand holding machine double head tunnel wall wind chisel hammer
The hand-held concrete chipper is a kind of tool that is used to deal with the completed main structural plane, so that the construction surface of the two construction stages will be firmly bonded, similar to the "chopping axe" tool.
Usually, the wall pneumatic chisel hammer is applied in the online cast-in-place concrete structure. After pouring the cast-in-place slab, we need to chisel hair and carry out the next layer of pouring so that the concrete will bond firmly.
So "bridge chisel hammer" is generally known as "concrete chisel machine".
The double head tunnel chisel is divided into two types: hand holding and hand push.
Such as the hand operated pneumatic double head chisel; the power source adopts the air compressor to ensure the high frequency and the corresponding chisel force, so as to facilitate the efficient operation.
Chiseling device is used in highway, railway, bridge, water conservancy and hydropower tunnel reinforcement reinforcement, reinforcement, building decoration, municipal road and bridge repair and reinforcement, airport, parking lot and chiseling reinforcement engineering ground treatment.
Machine model BC - 1A BC - 2A BC - 3A
Weight 2.1KG 3.2KG 5.2KG
Length 420mm 420mm 420mm
Height 1260mm 1260mm 1260mm
Width 320mm 380mm 560mm
The average equivalent of 0.96 square meters per second, 0.96 square meters per second, 0.96 square meters per second
The pressure of the air compressor matching is 5 kg / sq.