RaySafe DXR+ 的傳感器排列經過特殊設計以便適合實時檢測拍片機、乳腺機照射野和指示光野一致性的需要。
RaySafe DXR+ 可在低至30千伏的電壓下使用，并能給出客觀的，可復寫的而且能立即讀出的結果。
RaySafe DXR+ PCB 上可見一X射線影像的公制刻度，國際慣用規則建議照射野與指示光野一致性誤差應小于SID的2%.，而乳腺機則為距檢查床邊緣±5毫米，傳感器的特性給需要調整的地方提供了精確即時的結果。
標準配置：輻射電子尺1把，說明書1張，鋁合金包裝盒1只
International regulations recommends that the radiation and light field should be aligned within 2% of the SID or even ± 5 mm at the chest wall for mammo. The pocket-sized RaySafe DXR+ enables an bive, reproducible and immediate read-out down to 30 kVp. The RaySafe DXR+ sensor array has been specially designed to meet the needs of real-time radiographic and mammographic X-ray equipment. The sensor provides an accurate and instantaneous result it and therefore indicates where adjustment is needed. A metric scale on the RaySafe DXR+ PCB is visible on the X-ray image.
