夜色网,色欲aⅴ精品一区二区三区四区,国产精品jizz视频国产y网,欧美精品综合视频一区二区

Items                                                                                       Specifications

Model                                                                                                          AAM11, AAM11B

Input signal                                 0 to 10 V DC                                                          0 to 20 mA DC (*1) (*2)

(It is possible to supply power to a transmitter.)

Input resistance                         1 MΩ at power-up (100 kΩ at power-down)        250 Ω

Allowable b voltage/current  -10 to 30 V DC                                                     40 mA DC or less

Supplying power to transmitter                                       -                                        25.0 to 25.5 V DC (Output current limit: 60 mA DC

or less )

Auxiliary voltage output             1 to 5 V DC; Output resistance: 1 Ω or less;

Allowable load resistance: 10 kΩ or more; Signal ground is shared with system

Square root extrb               Specify whether to use square root extrb.

Accuracy                                   Voltage b: _4 mV;    Current b: _16 _A; Auxiliary voltage output: _12 mV

For 10 _C change:

Effect of ambient temperature       Voltage b: _4 mV + _ 0.15 % of specified value

change                                          Current b: _32 _A

Auxiliary voltage output: _24 mV

Data update period                    50 ms

Current consumption                 300 mA or less (5.0 V DC)

Signal isolation                           Input signals are isolated between systems

Withstanding voltage: 1500 V AC/min

How installed                             Installed in the I/O Module Nest

How connected                         Connected to the terminals of the I/O Module Nest with M4 screws

How b signals are specified  Specify b signals and range by software setting.

*1:  This module can be combined with MTL barrier 728.  In this case, wiring resistance must be 10 Ω or less and the minimum operating voltage of the 2-wire transmitter must be 12 V DC or less.

*2:  When the power of AAM11 is OFF or an abnormal condition occurs, the current b loop is open. Do not share current signals with other receivers. To share signal, attach Shunt Resistance (250 Ω) to current-output module and share voltage output.

 數字輸入輸出模塊：
ADM11T  接點輸入模塊 16點端子型
ADM12T  接點輸入模塊 32點端子型
ADM51T  接點輸出模塊  16點端子型
ADM52T  接點輸出模塊  32點端子型