PA46荷蘭加玻纖材料
PA46荷蘭加玻纖材料
專業代理商：荷蘭DSM PA46 TS250F8(BK) 特性: 耐高溫 玻纖增強級
專業代理商： 荷蘭DSM PA46 TS300 NC 特性: 耐高溫 注塑級 純樹脂
專業代理商： 荷蘭DSM PA46 TS35O(BK) 特性: 高強度
專業代理商： 荷蘭DSM PA46 TW200F6 BK 特性: 電鍍級 熱穩定玻纖增強 阻燃級
專業代理商：荷蘭DSM PA46 TW200FM33 BK 特性: 注塑級 高強度 30%玻纖強
專業代理商： 荷蘭DSM PA46 TW241F10 特性: 阻燃級 加50%玻纖
專業代理商：荷蘭DSM PA46 TW241F10-11000 特性: 纖維增強級
專業代理商： 荷蘭DSM PA46 TW241F12 特性: 高耐磨性 玻璃纖維增強60%
專業代理商：荷蘭DSM PA46 TW241F6 特性: 阻然級 30%玻纖增強
專業代理商：荷蘭DSM PA46 TW242FM10 特性: 耐磨耐高溫級 玻璃纖維增強50%
專業代理商： 荷蘭DSM PA46 TW271F6 特性: 30%玻璃纖維增強 耐高溫耐磨
Advantages available to DSM PA46DSM PA46 mould makers and end users include: DSM STANYL'S PA46 high temperature resistance, long-term use under the hood, lead-free soldering. Excellent Chemical Resistance, can extend the service life of components. Excellent Mechanical Properties, Reduce Wall thickness, thereby reducing weight and component prices. Because of its low creep property, excellent anti-fatigue property and low wear property, the service life can be extended and the perbance is more reliable. The re-grinding efficiency can reach 25-50% , and the product perbance is reliable without obvious decrease of economic benefit. Only a short cycle time can increase the production efficiency of the molding equipment by 30% due to the high mobility can be increased by increasing the number of cavity production efficiency. Due to its excellent mechanical properties and good die flow behavior, it provides greater design freedom. Can Be filled with extremely thin wall thickness of products, thus easily injection molding of the most advanced products. Using 80 °C 175 F water-hot injection mold, can achieve economic, safe and convenient processing. No flash phenomenon, so no post-processing. If higher heat resistance is required for high temperature applications, the same mould as PA6, PA66 or polyester can be used without replacement. Oh, Shit
